Trenchless Sewer & Pipe Repair using CIPP Lining Technology

Trenchless Sewer & Pipe Repair using CIPP Lining Technology

pipe-lining

Pipe and Sewer Drain Lining Repairs using Trenchless Pipelining

Using Cured in Place Pipe (CIPP) Pipelining, it is no longer necessary to dig underneath your buildings foundation, parking lot, garage, sidewalks or cut into condo walls to repair your building or condo associations plumbing. We can fix sewer, drain and water plumbing pipes without disturbing your residents or creating unneeded property repairs to the condos structure or landscaping.

Trenchless is Faster, Less Expansive & Lasts Longer than “Open Cut” Repairs

Our suite of “Zero-Dig” sewer and pipe liner technologies work on all types of plumbing pipe materials and diameters including PVC, Orangeburg, iron, steel, copper and clay. The typical pipe or sewer drain reliner installation only takes 1 day and generally no time is needed for structural repair to your building like with traditional pipe replacement.

We handle large communities and large buildings, and BlueWorks has the ability to Inspect, Clean and Line a segment of piping between 8AM and 5PM so customers never go without their basic plumbing needs! The process is repeated again the next day to the adjoining piping or next pipe inline, so the entire system can be repaired while residents are at work.

Did you know? For Senior Living, Healthcare Buildings and Special Needs customers, we can work at night or set up a temporary system so your residents Basic Plumbing needs are never shut down.

 

pipe-lining2

Variety of Sewer Drain and Pipe Lining Technologies

No one CIPP Pipe Lining System can handle all problems, so BlueWorks is proficient in a variety of “No Dig” Pipe and Sewer Lining Technologies. Perma-Liner Pull-In-Place, Inversion, Continuous Inversion, Large Diameter and Spin-Casting are all tools we use on a daily basis.

We have references to provide any customer considering pipelining for plumbing repairs. Our stated objective is to do a better job at a better price, so get a free competitive quote and let BlueWorks Work for you.

The Basic Pipe Liner Installation process is simple:

1. Identify the Problem by Sewer Camera

This takes all the guess work out of your plumbing problems, and confirms for the technician where the problem lies and which technology to use.

2. Clean the pipes

The first step is to clean out all roots and descale any calcite, etc. in order to return the pipe back to its original functioning diameter. To do this we either jet the lines or use pneumatic tools.

3. Install the liner

The length of liner needed is cut, a custom two part epoxy is mixed and poured in to permeate the felt liner. The saturated liner is then installed, the bladder is inflated and the curing begins. Once the epoxy lining has cured, the bladder is extracted, leaving a complete structural pipe within a pipe. Sewer Drain Liners Carry a 50 Year Manufacturers Warranty and will be installed utilizing either “Pull in Place” Method or Inversion, Conforming to applicable standards & requirements; NSF/ANSI standard 14 & ASTM: D543, D638, D790, D2990 F1216, and F1743. BlueWorks only uses approved lining materials.

Structural Liner Installation Process:

  1. Resin impregnation into liner
  2. Liner inserted to provide for a tight fit to the host pipe, providing a lined, leak free, pipe.
  3. Curing; approx (4) hours or until liner is hardened & launch device can be removed
  4. Re-Instate (if quoted) lateral connections & restore plumbing service
  5. Final Recorded Internal Pipe Inspection, Customer provided completed video

4. Insuring Quality

To insure that the job has been performed perfectly, a camera inspection is done to inspect the work completed, all plumbing connected is used to confirm the system is functioning properly and the customer receives, a written warrant and a copy of the final video inspection as well.

 

Actual Before & After Video of a Recent Pipelining Project