Trenchless pipe bursting is an easy way to fix broken pipes and a cost effective alternative to replacement of pipes that are deep under the surface. There are certain things you need to know in order to ensure a smooth trenchless pipe bursting procedure, here are some tips on trenchless pipe bursting in Sarasota.

1-Understand the Job

Before you decide what equipment you are going to use, it is important that you get to know the scope of the task. Know what kind of soil is involved, the length of the pipes, the extent of the damage and the appropriate action to take. In short carry out a thorough investigation, this will protect your equipment because using the wrong equipment can result for example in a cord snapping and this can delay the job for days.

2-Know your Machines

In as much as you should know the job, you need to know the machines you have and their capabilities. There is no reason to go down to the site with all the equipment you have, if you have understood the job, then you should pick the necessary equipment to be used. This saves time at the site for example if the pipes are located under a main road in Sarasota, you will want to minimise the amount of time you spend working there and the amount of equipment you have by the roadside so know what does what and carry only what you will need.

3- Minimise Cost by Attending to Sections, not the Entire Pipe

This does not apply to every trenchless pipe bursting job, but some jobs do not require that you line the entire pipe. It would, however, be senseless to burst the entire length of a pipe just to seal off a crack in a pipe. You can minimise the cost by identifying the location of the crack and then bursting that particular section if your investigations show that the rest of the pipe is fine and will not need any attention in the near future.

4- Ensure the Pit is Well Prepared

When you are carrying out trenchless pipe bursting, you will need a pit to gain access to the pipe and it is important that this pit is well prepared to avoid it caving in. Ensure that the machines will actually fit in there with no hassle. Once again this is tied to understanding the job you are carrying out, this will help you determine the size of the pit and the depth. It will also help to know if the pit is needed altogether.

5- Regularly Inspect the Machines

Before, during and after the job, it is important that you inspect the machines to ensure they are working properly. One of the most important machines to check is the air hose, you are going to need it for pneumatic bursting. It is important there are no holes because they will affect its efficiency. The bursting hammer too needs to be checked to ensure it is getting enough oil. Always keep the bursting hammer well oiled. Inspecting the machines ensures you are not taken by surprise that one of them needs to be serviced which will hold up the job.

If you follow these tips on trenchless pipe bursting in Sarasota you should have a smooth operation when pipe bursting and your client would be pleased with your work.

Call Now Button