Sewer lines just like other drainage systems wear off with time. They become old and corroded hence damaging the piping system. In such a case, you are advised to seek professional help in order to improve your water quality. A poor drainage system results in a mess thus corrupting the environment and the quality of water in your home. Most homeowners assume cracked pipes will just be replaced yet it may not be the case. Most at times, what you need to do is to simply replace the lining in order to preserve the pipe surrounding. Choosing an option to replace the pipe will just let you avoid collateral damages amounting from excavation of sewer lines. On the other hand, relining entails a number of options to choose from. Troublesome piping in Orlando, FL can be relined using different methods and this include;

Pipe Bursting

In case of a severely damaged pipe, plumbing professionals may advocate pipe bursting. The process involves either the repair of large sections of the pipeline or replacing the entire system. For a plumber to repair your pipe, there has to be permission to access through two square, 4-foot access pits in either side of the pipeline. The plumber then places a bursting head on the pipe’s access point. A hydraulic power is then used to drag the head into your piping system. As it penetrates the system, it tears apart the old pipes and introduces a new seamless one. The advantage with this process is that there is no worry on root intrusion because the pipe is plastic in nature. The method of relining is also less intrusive than excavation.

Pipe coating

On realization that your existing sewer lines are beginning to leak to the surrounding area, it is likely that plumbers will opt for pipe coating to resolve the problem. The process involves complete drainage of water in the pipes then spraying a thick coating of epoxy on the inside of the pipes. The method is important since it permanently seals all the cracks in your entire piping system.

Cured-in place

This is one of most common methods employed in trenchless repair. It involves cleaning and drying of the inner arts of the pipe. This is then followed by application of a lining on the affected area. Lastly, the professionals jet in a hot steam of water to cure it into place. Most sewer line companies repair cracks on the pipe without necessarily having to dig a trench. The new lining will mold on all the leakages and cracks.

Pull-in place

At times, the cracks may enlarge as time goes by. The method involves the use steam to fix materials into place. The plumber pulls the epoxy-saturated liner to the affected area that needs to be repaired. There has to be two access points; one that feeds the liner and the other one that pulls the liner thorough. The plumber then opens the sleeve using air and hold it against the inner walls of the pipe till it is totally dry.

All these methods results in a seamless and smooth end product.